- Pipe Fittings[10]
- Composite Pipes[8]
- Other Mining Machinery[3]
- Plastic Tubes[10]
- Sewer[3]
- Water Treatment[2]
- Floor Heating Systems & Parts[3]
- Hotels[1]
- Other Plastic Building Materials[1]
- Garden Hoses & Reels[1]
- Plastic Masterbatches[10]
- Other Plastic Raw Materials[2]
- HDPE[10]
- Plastic Processing Service[2]
- Polymer[1]
- Steel Wire Mesh[2]
- Elementary Substances[2]
- Other Plastic Products[2]
- Contact Person : Mr. wong peter
- Company Name : Qufu Donghong Industry Co., Ltd.
- Tel : 86-0537-15965733639
- Fax : 86-0537-4640987
- Address : Shandong,jining,No. 12 Tianhua Road,Qufu City, Shandong Prov.
- Country/Region : China
- Zip : 273100
PE Hot Melt Adhesive
PE Hot Melt Adhesive
1.This product applies to the steel wire reinforced hdpe composite pipe, which consists of a steel wire reinforcement layer between the inner & outer PE layer and is composited into one through extrusion molding technique with the special purpose hot melt adhesive.
2.The hot melt adhesive could mix with polyethylene resin for use. It has superior advantages of high adhesive strength, good thermo stablility and lower cost.
3.Processing technique of the hot melt adhesive is as same as that of common polyethylene, thus it has good operability and simple requirements on the equipments.
4. This product does not affect the technical performances of other materials when mixed together in use.
| Physical Property Index | |||||||||
| Physical Property | Unit | Standard Value | Test Value | ||||||
| Melt flow rate | g/10min | 1.5-3.5 | 1.66 | ||||||
| Tensile strength | Mpa | ≥16 | 19.11 | ||||||
| Elongation at break | % | ≥500 | 550 | ||||||
| V-cat softening temperature | °C | ≥120 | 121 | ||||||
| Brittle temperature | °C | ≤-50 | -54 | ||||||
| Peeling strengh | N/cm | ≥100 | 270 | ||||||
| All test values shown in above form come from our genuine experiment. The values are just for reference and do not act as data of formal quality commitment. | |||||||||
PE Hot Melt Adhesive
